577380 Features:
Versatility: Parallel cuts up to 280 mm; cross-cut width of up to 450 mm. Angled cuts from -2° to 47°.
Practicality: At a cutting height of up to 35 mm, through to angled cuts right down to -10°; ideal for undercutting infill panels.
Compact and mobile: Can be transported with one hand in the practical Systainer format. Even lighter with the UG-CSC-SYS underframe.
Extreme precision: The height and angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimetre.
Reproduce cuts easily: The height and angle (mm and inches) are set parallax-free via the digital display, i.e. more accurately than any visual judgment. Reproducible cuts are ensured.
Convenient: Four saw blade positions can be saved and selected via the digital display.
Highly precise parallel side fence: Robust parallel side fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results.
Highly precise angle stop: The angle stop is optimally aligned and centrally clamped via a groove on the slide. For mitre angles between -70° and +70°
Judder-free: Ball bearing-mounted slide for parallel and angled cuts with maximum precision.
Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm guarantees fast sawing progress and perfect cutting results.
Long-lasting: The combination of a brushless EC-TEC motor and a dual battery system with two 18 V battery packs (from 4.0 Ah) ensures a long operating performance.
Long-lasting: The brushless EC-TEC motor is long-lasting, robust, and maintenance-free.
Specification:
Battery voltage: 2 x 18 V
Idle engine speed: 4 500 – 6 800 min⁻
Saw blade location hole: 20.00 mm
Inclination angle: -10 – +47 °
Cutting height 0°: 0 – 48 mm
Cutting height 45°: 0 – 34 mm
Cutting height -10°: 21 – 32 mm
Mitre angle: 0 – 70 °
Parallel cut width: 280.00 mm
Tabletop height: 280.00 mm
Dimensions (L x W x H): 512 x 396 x 296 mm
Dust extraction connection diameter: 27/36 mm
Battery capacity: 5.00 Ah
Product weight: 15.00 kg
Included as Standard: 1 x CSC SYS 50 Cordless table saw, 2 x 18V (5.0Ah) Batteries, TCL 6 DUO Charger, G-CSC-SYS Workbench & Underframe, Chip collection sack, Parallel side fence, Splitting wedge with protective hood, Wood fine cut HW 168 x 1.8 x 20 WD42 circular saw blade, and 1 x Workpiece holder.
3 Years Warranty on all Festool Power Tools Including Batteries & Chargers when registered.
