The DCS782 18V XR Sliding Mitre Saw Kit is the ultimate saw for both first and second fix applications on the jobsite. It can deliver up to 371 cuts in 83mm skirting board with one DCB1880-XJ 18V 8Ah XR battery. The DCS782 will work with all 18V XR and 54V XR FLEXVOLT® batteries, so you can make the most of all your current batteries. Engineered for repeatable accuracy with dual horizontal rails and a stainless-steel detent plate with common angles at 0, 15, 22.5, 31.6, 35.3 and 45 degrees. Other features include Wireless Tool Control to enable automatic stop start dust extraction when used with the DCV586M, XPS crosscut positioning system for the ultimate in accuracy and visibility with no calibration needed and 100mm side handles for material support and increased portability on site.
The DeWalt DCS782 is part of the cordless 18V XR system, which is fully compatible with over 250 industrial cordless tools.
Product Features:
Large dual sliding fence: provides maximum support in large material cuts at any angle or combination of angles.
Compact & lightweight: application focussed cut capacities, with a lightweight compact design for easy transport around the jobsite.
XPS shadowline: provides fast accurate alignment of the blade with no adjustment required.
Stainless steel detent plate: robust and easy to recalibrate, with common angles at 0, 15, 22.5, 31.6, 35.3 and 45 degrees.
Airlock dust port: airlock compatible dust extraction for simple connection.
Wtc dust extraction: wireless tool control allows direct connection to a compatible vac with auto stop/start.
Cam lock mitre control: makes mitre setting faster and easier, allowing to quickly adjust angles between 0° - 50° left and 0° - 60° right.
Double bevel: intuitive bevel lock with machined stops provides accurate and simple setting of bevel angles up to 49° left and right.
Depth stop allows the adjustment of the cutting depth for grooving and rebating applications.
Machined base & fence: designed, machined and checked to the highest standards of accuracy to deliver 0.1° accuracy.
Product Specification:
Blade Diameter: 305mm
Bore Size: 30 mm
Max Depth of Cut at 90°: 310 mm
Max Depth of Cut at 45º-54mm
Max Mitre Range: 45 - 57º
Max Mitre Cut at 90º: 52 x 212 mm
Max Mitre Cut at 45º: 25 x 212 mm
No Load Speed: 3,800 rpm
Length: 775mm
Weight: 23.2 kg
Included as Standard: 1 x DCS782 Mitre Saw, 1 x XR 8.0Ah Charger, 2 x 8.0Ah DeWalt XR Batteries, 1 x 18V XR 305mm Mitre Saw, 1 x Stabilizer Bar, 60 Tooth Blade, 2 x Base Extensions & 1 x Material Clamp.
Exclusive 3 Years Warranty on all DeWalt Power Tools including Batteries & Chargers when registered.
