TimbaBuild EWS Epoxy Wood Stabaliser Solution 225m
TimbaBuild Epoxy Wood Stabiliser is a specially designed two-part low viscosity, solvent-free solution which is designed to strengthen weakened wood fibres by penetrating deep into the wood.
The Stabiliser Solution should always be used as a primer with TimbaBuild Epoxy Repair Wood Fillers.
Once the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool such as a router or chisel, then the area to be treated is lightly sanded to ensure excellent adhesion.
The moisture content of the wood should be no greater than 18% (check using a standard moisture meter) and damp wood should be allowed to dry naturally, or by way of a hot air gun.
The two components should be mixed manually into a separate container at a 2:1 ratio, and thoroughly agitated for one minute.
Epoxy Wood Stabiliser should be applied using a standard brush and left to cure for 30 minutes.
Suitable for use indoors or outdoors.