Tred KWJ700 700mm Trade Worktop Jig

Calculating latest stock
TREND KWJ700 700MM TRADE WORKTOP JIG
Code:
Part No: KWJ700TRE
Order For Delivery
Select the required delivery time and method at checkout.
Total Stock Available:1
Spend over £30+vat for a FREE GIFT
Click & Collect
Check the stock levels at our depots below and select ‘Click and Collect’ at checkout (where available).
Check the stock at each depot:
View depots
Derby
1 in stock
Out of stock
Nottingham
0 in stock
Out of stock
Burton
0 in stock
Out of stock
Mansfield
0 in stock
Out of stock
Chesterfield
0 in stock
Out of stock
£69.00 each
exc. VAT
£82.80 each
inc. VAT
Add to order

Klarna 0% finance available on orders over £99 inc. vat

Product Overview

Manufacturer: Trend

  • The Trend KWJ700 700mm Worktop Jig  is a mullti function jig used for accurately fitting kitchen worktops with a plunge router, in 10 different widths from 250mm to 700mm wide.


    Features:

    Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.

    Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.

    Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 635mm. 650mm and 700mm wide worktops.

    Cuts up to 40mm thick worktops with or without anti-drip postformed edge.

    Three open-ended bolt recesses (dog bone style) for 150mm bolts.

    Engraved lines for short 65mm bolts and worktop cross-cut.

    10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up.

    Engraved markings for identification of pin holes.

    Pins made from ABS plastic for strength.

    Jig requires:

    A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.

    A template guide bush with 30mm outside diameter ref. GB30.

    A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.

    Two clamps.

    Specification:

    Length: 985 mm

    Width: 390 mm

    Thickness: 12 mm

    Weight: 5.4 kg

    End Cut: 45 degrees

    Corner Radius: 40 mm

    Corner Radius: 100 mm

    Corner Radius: 400 mm

    Corner Mitre Joint: 45 degrees

    Female cut material width loss (inset): 35 mm

    Bolt recesses: 3

    Bolt recess centres: 175 + 175 mm

    Bolt recess width: 14 mm

    Requires:

    Guide bush: 30 mm

    Plunge router: 1/2-inch (min. 1300 watts)

    Cutter: 12.7 mm x 50 mm cut

    Clamps: Two