Easy to use with minimal set-up time, completing the job quickly and accurately.
Can be used on-site or in joinery workshops, to increase productivity.
Fully adjustable quick-release apertures for fire door requirements and renovation work.
Ideal for fitting a new door in an old frame – whether it be internal or external doors.
No need for marking out in the conventional way.
Quick and simple to set-up as the hinge is used as the pattern.
Clean and accurate recesses are achieved every time.
Suitable for timber based doors and square butt hinges.
Adjustable edge guides with three pre-set hinge widths: 20mm, 25mm and 30mm.
Use with any ¼” router and 12mm diameter long reach straight router cutter.
Supplied with a 16mm template guide – certain makes and models of router may require a Unibase to accept the guide bush.
Trend recommend using the GB160 16mm template guide bush with a 10mm spigot length.
Most makes and models of router can be used with a Trend UNIBASE to accept the Trend range of template guide bushes for optimum accuracy.
Hinge sizes possible:
Length min/max: 67mm or 2 5/8” / 127mm or 5”
Width min/max: 12.7mm or ½” / 35mm or 1 3/8”
Maximum width in 35mm rebate: 23mm
Maximum width in 44mm rebate: 32mm
Door sizes possible:
Height min/max: 1956mm or 6' 5" / 2100mm or 6' 10"
Thickness min/max: 16mm or 5/8" / 51mm or 2”
Hinge Jig Specification:
Edge stops thickness: 6mm
Jig overall length: 1956 mm
Plate thickness: 3mm
Fixed stop maximum thickness: 25mm (max. hinge leaf width is 22mm / 35mm doors)
Weight: 2.9kg
Included as Standard: 3 x aperture block assemblies, 4 x bradawls, 16mm guide bush & fabric storage case.
