The TCT countersink clamps onto any drill bit between 3.0mm and 7.2mm in diameter.
Manufactured from high grade tungsten carbide for a clean and smooth finish.
By flipping the countersink 180°, it can be used as a non-cutting depth stop.
Drill bit not included – use any standard HSS drill bit.
When fitting the countersink ensure the pressure is evenly over the two securing grub screws.
Do not over-tighten – hex key included.
Can be used to: 1. flush countersink, 2. below level countersink or to 3. countersink and counterbore.
Specifications:
Countersink Depth (C): 12mm
Countersink Diameter (D): 11.0mm – 15.0mm
Pilot Diameter (d): 3.0mm – 7.2mm
Countersink Angle (A): 45°
Overall Length (OL): 32.0mm
