Easy to apply using pressure pots and gravity feed systems. If used in combination with the 3M PPS system, it is necessary to remove the lid's filter.
Unlike self pressurised canister systems, disposal of the container is not problematic.
Very fast drying time.
Completely non-chlorinated formulation. No Methylene Chloride, no Dichloromethane.
Bonds a wide variety of substrates, including decorative laminates, wood, metals, rubber, fabric, most plastics, cardboard, polythene and concrete.
Ideal for permanent bonds that require good initial bond strength to allow immediate fabrication, for example; cutting, trimming and machining.
Provides good temperature resistance and if protected from contamination has an open time of several hours.
Always test a small sample of the materials first to ensure the suitability of the product for the application. For instance, some vinyls contain large amounts of plasticiser which, over time, can migrate and soften the bond.
Class 1 Fire Rated to BS 479: Part 6: 1989+A1: 2009 Method of Test for Fire Propagation for Products and BS 476: Part 7: 1997 Method for Classification of the Surface Spread of Flame of Products.
Specification:
Solvent: Acetal
Propellant: Hydrocarbon
Solids: Content (approx) 27%
Spray Pattern: mist, typical of spray paint application depending on spray gun and tip - 1.2mm recommended.
Colour: Clear
Coverage 5L: Approximately 40m2 (at 25g/m2 dry coat)
Heat Resistance: (SAFT) 100ºC
