Trend LOCK/JIG Lock Jig Kit
Product Overview
Manufacturer: Trend
-
Trend LOCK/JIG is a contractor jig with interchangeable templates, to cut the mortise and face-plate recesses for popular door locks, when used in conjunction with a plunge router.
Read more
Designed for routing the most common sash mortises and dead locks, with up to 75mm/3” deep mortises and a 22mm/ 7/8” or 25mm/1” face-plate.
Deeper mortises can be achieved with a suitable sized auger drill bit.
Fast, clean and accurate results on doors from 34mm to 58mm thick, even in hardwood.
Precision manufactured steel plates and body.
Use with any ½” router with 80mm plunge depth, 12.0mm diameter long reach straight router cutter and 30mm template guide.
Specification:
Minimum door thickness: 34mm
Maximum door thickness: 58mm
Template outer size: 234.3 x 59.8 x 1.5mm
Included as Standard: Guide bush collar, line-up template, 12x faceplate templates & 4x mortise lock templates.
Faceplate templates included (D x OL):
Template 1: 22.2 x 156mm (7/8" x 6 1/8")
Template 2: 22.5 x 152.5mm (7/8" x 6")
Template 3: 25.4 x 121mm (1" x 4 3/4")
Template 4: 25.4 x 127.5mm (1" x 5")
Template 5: 25.4 x 133.5mm (1" x 5 1/4")
Template 6: 25.4 x 145mm (1" x 5 3/4")
Template 7: 25.4 x 153mm (1" x 6")
Template 8: 25.4 x 156.5mm (1" x 6")
Template 9: 25.4 x 165.5mm (1" x 6 1/2")
Template 10: 25.4 x 177mm (1" x 7")
Template 11: 25 x 57.5mm (1" x 2 1/4") upper / 26 x 56.5mm (1" x 2 1/4") lower
Template 12: 25.6 x 162mm (1" x 6 3/8")
Mortise lock templates included (D x OL):
Template A: 16 x 72mm (5/8" x 2 7/8")
Template B: 16 x 107mm (5/8" x 4 1/4")
Template C: 19 x 78mm (3/4" x 3 1/8")
Template D: 19 x 109mm (3/4" x 4 1/4")
Nb. These are maximum mortise lock case body lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.