-
Rems 520017 Eva Manual Ratchet Pipe Threader 1/2" – 2" BSPT
£435.00 exc. VAT£522.00 inc. VAT -
ISO HSS Metric Coarse Second Hand Taps
£6.53 – £13.89 exc. VAT£7.84 – £16.67 inc. VAT -
Conduit Dies
£10.96 exc. VAT£13.15 inc. VAT -
Conduit Guides
£2.87 exc. VAT£3.44 inc. VAT -
Conduit Die Stock
£21.15 exc. VAT£25.38 inc. VAT -
Die Stock Handles
£9.02 – £18.68 exc. VAT£10.82 – £22.42 inc. VAT -
HSS M2 Metric Coarse Split Dies To BS1127
£16.67 – £29.72 exc. VAT£20.00 – £35.66 inc. VAT -
ISO HSS Metric Coarse Plug Hand Taps
£6.53 – £13.89 exc. VAT£7.84 – £16.67 inc. VAT -
ISO HSS Metric Coarse Taper Hand Taps
£6.53 – £13.89 exc. VAT£7.84 – £16.67 inc. VAT -
Tap Wrenches
£20.26 – £29.32 exc. VAT£24.31 – £35.18 inc. VAT -
Milwaukee Threaded Rod Cutting Dies for M18BLTRC – Pack of 2
£72.75 exc. VAT£87.30 inc. VAT
Threading Taps & Dies
Cutting threads by hand will require a die and die stock for external threads on bar and pipe and a tap wrench and tap for internal holes to receive bolts and threaded fasteners. Threads provide a very secure fitting when bolting components together and can be disassembled easily for maintenance, damaged threads can also be chased which is the term used for repairing pre-cut threads.
Taps and dies need to be manufactured out of a metal that is harder than the material they are going to apply threads to. High Speed Steel (HSS) is common as it will tap mild steel, cast iron and non ferrous metals, cobalt taps and dies are preferred for stainless steel. When cutting your thread, lubrication is essential as it helps to provide clean cutting edges and reduce friction in the cutting process reducing the risk of snapping the tap or die.
Tapping can be a three stage process especially with holes that do not penetrate right through the material, this is know as a blind hole. A taper tap is usually the first stage of the tapping process allowing for easy centering of the tap in the hole, a taper tap does not start to cut a full thread until higher up the shank when compared to second and plug taps. Second taps extend the range of the fully cut threads as they produce full threads quicker than a taper. A plug tap immediately starts with a full thread and is the only tap that produces a full thread at the bottom of a blind hole. In the case of through holes where the hole penetrates all the way through the material a second tap can sometimes be used to perform the tapping operation in once pass.
If you are looking to cut threads on pipes, bars and metal sections, Protrade has a range of diestocks, tap wrenches, taps and dies available.
Showing 11 of 11 products
Loading filters please wait.
