Maxitek Storm D4 Waterproof PVA Wood Adhesive x5 & Screw Kit
Containing 5 x 1 litre bottles of Maxitek Storm D4 PVA and a 1000pce premium Screw Pack, this bundle is an essential for any volume professional woodworker, joiner or general tradesman.
Maxitek Storm D4 PVA Wood Adhesive is a waterproof adhesive that meets the requirements of BS EN204/D4 for long-term exposure to water and weather conditions.
Storm D4 PVA wood adhesive is super-fast setting – hand tight in as little as 10 minutes with a very high final bond strength .
Suitable for interior and exterior use.
Super-fast drying… dries clear.
Non-discolouring and easy water clean-up.
Excellent heat resistance, passing the WATT 91 standard.
Low odour; compliant with numerous indoor air quality standards.
Incredibly high solid content; more than 20% higher compared to other D4 wood adhesives, for unrivalled final bond strength and performance.
Very stable viscosity for consistent and easy dispensing.
Lower minimum film forming temperature compared to other D4 wood adhesives, allowing Storm D4 to be used in lower temperatures.
Storm D4 can be used with radio frequency equipment as well as hot presses.
Suitable for the bonding of high-pressure laminates, wood veneers and plastic laminate to chipboard, plywood, hardboard and MDF substrates, bonding kitchen and bathroom work surfaces and furniture, window and door frames, exterior furniture and general joinery.
Ultimate performance professional woodscrew pack with yellow passivated finish for maximum corrosion resistance.
High quality single thread countersunk pozi woodscrews, with self-countersinking ribs and split reducing grooves.
The Torsion grooves allow for greater material displacement, which greatly reduce splitting in all timbers and board materials without pilot drilling.
Installation of the screws close to edges is also possible.
The unique Torsion ribs aid the countersinking process preventing bulging and surface damage.
The second countersink reinforces the head to prevent snapping and allows for maximum insertion of the screwdriver bit to prevent cam-out and premature bit wear.
Thread configuration allows very fast insertion and high pull-out values.
The very sharp point offers fast pick-up in all timbers and board materials.
Specially hardened steel to prevent breakage.
Lubricated with a non-toxic coating to reduce the energy required to insert the screw. This is particularly important when using with battery powered tools as it allows more screws to be driven per charge.
Batch tested with full traceability and CE approved for structural timber products, ensuring safe and consistent high quality.
Supplied in a robust one-piece box to prevent box collapse and subsequent wastage.
Torsion ribs feature on screws that are over 30mm in length; this enables screws of 30mm and less to be used for attaching pre-countersunk hardware and fittings to substrates without the risk of damage.
Screw lengths over 6.0mm and over are partially threaded for improved clamping performance.
Ideal for joinery, shopfitting, building and general maintenance.
Contents: 120 3.5 x 25mm, 100 3.5 x 30mm, 150 3.5 x 40mm, 160 4.0 x 25mm, 150 4.0 x 30mm, 100 4.0 x 40mm, 80 4.0 x 50mm, 50 4.0 x 60mm, 50 5.0 x 50mm & 40 5.0 x 70mm