The new multi-component Bit-Checks satisfy these requirements; the soft material in the lower section of the Bit-Checks ensures that the bits are firmly held yet easy to remove.
The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand.
The Bit-Checks by Wera are extremely compact and are therefore the ideal companion for mobile applications.
Rapid bit change without needing any additional tools. One-hand operation with freely spinning sleeve for simplified guidance of the tool. Also available in BiTorsion design.
Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits.
TORX tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that “normal” TORX tools cannot be used. This pin fits into the borehole of TORX BO tools allowing safety screws to be unfastened.
The problem with hexagon socket screws is that they quickly become rounded. This is caused by the sharp corners of the conventional tool pressing against the inside of the screw head. The gradual wear process eventually leads to a rounding of the head. Wera Hex-Plus tools have a larger contact surface inside the screw recess. This reduces the notching effect and thereby also the deformation of the screw head. At the same time, up to 20% more torque can be transferred.
Genuine Wera accessory from an authorised partner: 05056440001
Order For Delivery 
Click & Collect 
World of Wera – 20% Off 
